[table param1=”param-value1″ param2=”param-value2″]STRUCTURE[/table]

[table]addition,$90-$120/sq. ft.
basement walkout, $5000-$10000
baesment main beam, $2000
basement support post/foundation, $500
excavation/waterproofing, $120-$150/sq. ft.
foundation cracks (excavation method),$500-$1000
foundation cracks (injection method),$400
masonry wall,$500-$700 lin. ft.
lower basement,$200-$400
remove bearing wall,$2000-$3000
remove partition wall,$800-$1600
resupport floor joist (sistering),$300-$500
roof sheathing (replace),$5.00-$7.50 per  sq. ft.
underpinning,$300-$500 per lin. ft.
termite prevention (chemical soil treatment),$2000[/table]

[table param1=”param-value1″ param2=”param-value2″]WALL SYSTEM[/table]
[table]aluminum siding, $4.50-$5.50 per sq. ft.
brick veneer, $9.50-$21.50 per sq. ft.
brick cleaning (unpainted), $2.50 per sq. ft
brick cleaning (painted), $5.50/sq. ft.
brick repainting, $5-$7 per. sq. ft.
cedar siding, $9-$12/sq. ft.
stucco, $9-$11/sq. ft.
vinyl siding, $4-$5/sq. ft.[/table]

 

[table param1=”param-value1″ param2=”param-value2″]EXTERIOR DOOR[/table]
[table]aluminum storm door, $350
metal insulated door, $750-$1500
patio door-replace, $750-$1500
patio door-brick wall (6ft.), $2500-$3500
patio door – wood wall (6ft.), $2000-$3000[/table]

 

[table param1=”param-value1″ param2=”param-value2″]EXTERIOR DOOR[/table]
[table]asphalt shingle (over existing), $1.75-$2.75/sq. ft.
asphalt shingle (strip and reshingle), $3-$4/sq. ft.
asphalt shingle (high quality), $4.50-$6.50/sq. ft.
cedar shake/shingle, $6.50-$9.00/sq. ft.
clay tile, $15-$20/sq. ft.
concrete tile, $8-$12/sq. ft.
wood shake,shingle  $5-$7/sq.ft.
slate tile, $30-$50/sq.ft.

 

[table param1=”param-value1″ param2=”param-value2″]FLAT ROOFS[/table]
[table]roll roofing asphalt (90lb). $1.50-$2.50/sq.ft.
4 ply (tar and gravel), $5-$10/sq.ft.
single ply membrane, $5-$10/sq.ft.[/table]

 

[table param1=”param-value1″ param2=”param-value2″]GUTTERS[/table]
[table]gutter cleaning, $150
gutter/downspout – aluminum, $6-$8/lin.ft.
gutter downspout galvanized, $5-$6/lin.ft.
downspout extension, $15
soffits/fascia (aluminum), $15/lin.ft.[/table]

[table param1=”param-value1″ param2=”param-value2″]FLASHING[/table]
[table]chimney flashing (sloped asphalt), $250-$400
chimney flashing (flat built-up), $350-$500
metal cricket at chimney, $250-$400
parapet wall flashing, $30/lin.ft.
roof vent flashing, $100
reflash skylight, $400-$600
valley flashing, $20-$30/lin.ft.
wall flashing, $5-$6/lin.ft.[/table]

[table param1=”param-value1″ param2=”param-value2″]CHIMNEY[/table]
[table]chimney extension, $150-$250/lin.ft.
chimney repointing, $7.50-$10/brick
concrete cap (single flue), $100-$250
concrete cap (double flue), $200-$400
rain cap, $100
reline flue, $40-$50/lin. ft.[/table]

ELECTRICAL

[table param1=”param-value1″ param2=”param-value2″]ELECTRICAL[/table]
[table]